cecotec BOLERO AGUAZERO 6100 FULL-BI E Manual De Instrucciones página 93

Switching off the dishwasher
The digital display shows "---" and the machine beeps 6 times; only in this case the
-
programme is finished.
Switch off the dishwasher by pressing the power icon.
-
Cut off the general water supply.
-
Open the door carefully. When opening the door, steam may come out.
-
Hot dishes are sensitive to shocks. Therefore, you should let the dishes cool down for 15
-
minutes before removing it from the appliance.
Open the dishwasher door, leave it ajar and wait some minutes before removing the
-
dishes. This way, it will be cooler, and the drying will be better.
Unloading the dishwasher
It is normal for the dishwasher to be damp inside.
-
First empty the lower basket and then the upper one. This will prevent water from the upper
basket from dripping onto the dishes in the lower basket.
7. CLEANING AND MAINTENANCE
Filtering system (Fig. 18)
The filter is used to prevent large debris and other debris from entering the pump. Debris
-
can clog the filter at any time.
The filter system consists of a coarse filter, a flat filter (main filter) and a microfilter (fine
-
filter).
1. Flat filter
Food and debris will be trapped in the lower spray arm.
2. Coarse filter
Large debris, such as bones and glass, which could clog the drain, will be trapped in the
-
coarse filter.
To remove an object caught in this filter, gently squeeze the tabs above this filter and lift
-
it out.
3. Microfilter
This filter retains dirt and food debris in the drain area and prevents it from being
-
deposited back into the dishes during a cycle.
Check the filters for blockages every time the dishwasher is used.
-
The filter system can be removed by unscrewing the coarse filter. Remove food debris
-
and clean the filters under running water.
BOLERO AGUAZERO 6100 FULL-BI E
ENGLISH
93