cecotec BOLERO AGUAZERO 6100 FULL-BI E Manual De Instrucciones página 98

ENGLISH
8.5 Levelling of the device
The angle of inclination must not exceed 2 degrees. Adjust the height by turning the legs to
ensure that the dishwasher is level.
Fig. 29 key:
1.- Adjustment of the front legs
2.- Adjustment of the rear legs
8.6 Fixing of the appliance
1.- Fix the dishwasher to the cabinet using the ST4*26 wood screws on the right and left
sides.
2.- Insert the plugs into the 4 holes.
Fig. 30
NOTE:
To connect the water inlet hose, the drain hose, and the power supply cable, follow the
instructions given in the previous sections of the manual.
9. TROUBLESHOOTING
Error code
When some faults occur, the appliance displays error codes to warn you.
Codes Problem
E1 Door open
E2 Water inlet
E3 Water drainage
E4 Temperature sensor
E5 Overflow/leakage
E6 Water leakage
E7 Heating element
WARNING!
BOLERO AGUAZERO 6100 FULL-BI E
98
Possible causes
The door is open when the dishwasher is
in operation.
Failure in the water inlet system.
Incorrectly installed or clogged water inlet
hose
Failure of the water drainage system.
Incorrectly installed or clogged drain hose
Failure of the temperature sensor
Overflow/leakage of water occurs
Water leakage occurs.
Abnormal heating