Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
5.
Slide the power switch upwards; the power indicator light will start flashing. Once
the preheating process is completed, the power indicator light will stop flashing
and will remain steady. Turn the coffee switch to the on position and, once the
machine has finished dispensing hot water, turn it off.
Preparing an espresso
1.
Following the "Preheating" steps above, remove the portafilter by turning it to the
left. Add the ground coffee into the filter with the measuring spoon. One tablespoon
of ground coffee makes one cup. Then, use the other end of the measuring spoon to
press the ground coffee.
2.
Insert the stainless-steel mesh filter into the portafilter. Ensure that the funnel
tube is aligned with the slot in the machine. Then, install the portafilter into the
coffee machine from the unlocked position by turning it counterclockwise until it
locks into the locked position.
3.
Empty the dispensed water from the cup and place it back into the drip tray.
4.
Turn the coffee switch to the ON position; the coffee indicator light will start
flashing. Wait for a moment until the coffee starts to come out. When the desired
amount is obtained, turn the coffee switch to the off position. The machine will
stop brewing coffee. If the switch is not switched off, coffee will come out for 60
seconds and then the machine will stop brewing automatically. The coffee indicator
light then flashes rapidly, reminding you to turn off the coffee switch.
Warning
Do not leave the machine unattended during preparation, as it may be necessary to
-
handle the machine manually.
When you have finished brewing coffee, remove the portafilter from the machine by
-
turning it clockwise and then remove the coffee residue from the filter by pressing
the pressing lever.
Rinse the metal funnel and the stainless-steel mesh filter with water.
-
The recommended cup volume is approximately 30 ml for single coffee and 60 ml
-
for double coffee.
Preparing hot water
Once the preheating process is completed, the power indicator light will stop flashing and
will remain steady. Next, press the steam switch twice within 2 seconds. The steam indicator
light will start flashing and the water pump will start dispensing water. Turn the steam knob
to the steam/hot water position so that hot water comes out from the steamer. To stop
dispensing hot water, turn the steam switch to the off position. If the steam switch is not
switched off, hot water will come out for 60 seconds and then the machine will stop brewing
automatically. Then, the steam indicator light flashes rapidly, reminding you to turn off the
steam switch.
44
Publicidad
