JMA NOMAD GO Manual De Usuario página 23

SAFETY MEASURES
2. SAFETY MEASURES
2.1 REGULATIONS
The NOMAD GO key cutting machine and its safety devices
are compliant with Directive 2006/42 EC on Machinery.
This manual cites all the safety regulations that the user
must respect when installing and operating the machine.
Failure to follow these instructions may compromise the
safety conditions provided for during design and testing.
When used for the purpose for which they have been desig-
ned, all machines bearing the CE mark are compliant with
EU Directive 2006/42 EC on Machinery.
2.2 SAFETY DEVICES
1. The machine operator must know and
follow the instructions provided in this
manual.
The NOMAD GO key cutting machine is fitted with safety
and other protective devices that define the user operation
area in order to guarantee their safety.
2.2.1 User protection
- Safety screen that protects against possible accidental
activation of the master switch.
- Anti-swarf screen. The operator must still wear safety gog-
gles even though this device is present.
- Protective tube over the main axis rack for the carriage
assembly.
2.2.2 Personal protection equipment
When operating or maintaining the NOMAD GO machine,
users must wear the following personal protective equip-
ment:
- CLOTHING: Those responsible for maintaining and ope-
rating any key cutting machine should wear protective clo-
thing that meets all the basic safety requirements currently
in effect. On wet floors, users should wear safety shoes with
a non-slip sole.
- SAFETY GOGGLES: The operator should wear safety gog-
gles over the eyes during the duplication stages of operation.
2.2.3 Safety signs and symbols
1. Safety goggles must be worn
2. Read the instruction manual before opera-
ting the machine
3. WARNING! Hazardous operation
4. WARNING! Rotating tool
5. WARNING! Electrical voltage
The NOMAD GO key cutting machine uses the following
safety signs and symbols:
2.2.4 General safety instructions
Switch off the power switch (11), switch off the
master switch (15), close the protective screen (16)
and check that the machine is NOT connected to
the battery charger.
- Do not try to remove the battery, do not apply pressure to
it or expose it to heat or fire as this may cause it to explode.
- Keep all electrical connections safe from water and other
liquids.
- Do not pull violently on the electrical power cord.
23 23 23
EN E E