Publicidad
Chapter 4
|
Operation
Selecting a Preset
Four presets are available. Press the soft key below
T1
T2 37.0°C
T3 50.0°C
T4 55.0°C
Changing a Preset
Note This procedure applies to Shaker, Circulating and General Purpose Baths only. Coliform bath
presets are fixed and cannot be changed.
Changing a preset does not automatically select it. Once a change is made you will have to return
to the Preset screen and follow the Selecting a Preset procedure.
Press the soft key below
T1
T2 37.0°C
T3 50.0°C
T4 55.0°C
CAL
If desired, press the arrow keys to highlight another preset parameter or press
to the home screen.
4-6
|
Precision
35.0°C
to display the Presets screen.
35.0°C
T1:35.0°C
RTA 0.0°C
to display the Presets screen.
To select the desired preset use the arrow keys to
highlight it and then press
will appear with the desired preset set point value.
To change a preset first highlight it using the arrow keys
and then press
.
Press the arrow keys to highlight the desired preset
parameter and press
and hold, the arrow keys to change the value.
Once the desired value is displayed press
. The home screen
again. Then press,
.
to return
Thermo Scientific
Publicidad
