Publicidad
contact with devices containing electrical components. This appliance is not
intended for use by children or persons with lack of experience and knowledge
without the supervision. Do not use the steam mop if the power cord is
damaged, contact an Authorized Service Centre for replacement. If the
appliance is damaged, do not disassemble or attempt to repair the appliance.
Do not use the steam mop for cleaning surfaces with a temperature resistance
of less than +100 °C. Use only purified water with no chemicals or detergents
added. Allow the steam mop to cool down completely before disassembling
and cleaning (at least 15 minutes). Do not use the brass brush on sensitive
surfaces, e.g. enamel, acrylics.
Before you begin
1. Unpack the mop and accessories.
2. Open the cover of the water tank (6) on the body of the appliance (4). Fill the
water tank (5) with water using a measuring cup (16). Put the cover (6) back.
Table 1. Function and installation of accessories
Nozzle
Destination
Steam mop
Floor cleaning
together with
head (10)
cleaning cloth (11)
Extension
Extension of the
appliance for
tube (2)
effective cleaning of
floors and hard-to-
reach areas
Microfiber
Gentle cleaning of
pad (11)
hard floor coverings
aeno.com/documents
Build
Connect the handle (1) to the
extension tube (2) and attach it to the
steam mop body (4). Slide the body (4)
into the mop head opening (10) as
shown in fig. F
Insert the tube (2) with the handle (1)
into the steam mop body (4). Slide the
steam mop body (4) into the steam
mop head (10) as shown in fig. F
Assemble the mop (see instructions
above). Attach the underside of the
mop pad (11) to the Velcro of the steam
mop head (10) as shown in fig. J
11
Publicidad
