Publicidad
Note: you can adjust the steam mode with the steam button (7). The number
of lights (8) illuminated will change accordingly (from 1 for minimum mode to
3 for maximum mode).
WARNING! Keep an eye on the water level in the tank during use. Do not use
the steam mop with an empty tank; do not empty the tank during operation
as this could damage the appliance.
Troubleshooting
1. The steam mop does not heat up. Possible reason: the appliance is not
switched on or is not connected to the power supply. Solution: Ensure that
the appliance is switched on, the power plug is connected to the power
socket and that the power socket is in proper condition.
2. The steam mop does not generate steam. Possible causes: low water level in the
water tank; the appliance is not switched on or not plugged in. Solution: Unplug
the appliance and fill the tank with water; check that the mop is switched on, the
plug is connected to the socket and the socket is in order.
3. The steam mop leaves water on the floor. Possible causes: the floor cloth is
too wet; wrong steam release mode. Solution: switch off the appliance,
detach and wring out the mop pad; select a different steam mode.
WARNING! If none of the possible solutions solves your problem, contact your
supplier or service center. Do not disassemble or attempt to repair the unit yourself.
ASBISc reserves the right to modify the device and to make changes and additions to this
document without prior notice to users.
The warranty period and service life is 2 years from the date of retail sale of the product.
Manufacturer's information: ASBISc Enterprises PLC, Iapetou, 1, Agios Athanasios, 4101, Limassol,
Cyprus. Made in China. All trademarks and names herein are the property of their respective
owners. Up-to-date information and a detailed description of the device, as well as connection
instructions, certificates, information about companies that accept quality claims and warranties,
are available for download at aeno.com/documents.
aeno.com/documents
13
Publicidad
