Publicidad
Idiomas disponibles
Idiomas disponibles
mains or if there is a power failure. In this case, repeat the instructions
above to reset the clock. The hour and minute can be reset at any time.
SETTING THE AUTO-ON FUNCTION
1. First, make sure the clock on the appliance is set to the correct
time. If the time shown is incorrect, follow the instructions in the
"Setting the clock" section.
2. Press the "PROG" button (K) once (Fig. 15). The LED light will
come on.
3. Use the "HOUR" (L) and "MIN" (M) buttons to set the desired start
time for the brew cycle. (Fig. 16 and 17)
4. After your selection, auto start time on the LCD screen will flash
for five seconds and the time is set. The blue LED light will stay on.
Note: i) The current time is shown on the screen.
ii) You can cancel the auto start function by pressing the "PROG"
button (K). The LED light will go out.
iii) If you want to change the set auto start time, simply repeat
steps 1 to 4 above.
5. The coffee maker will automatically brew coffee at the set auto-on
time.
USEFUL INFORMATION AND TIPS
You can only set one auto-on time at a time on this machine.
The brew cycle can be interrupted at any time by pressing the
"START/PAUSE" button (O); the red LED light will turn off.
SETTING THE COFFEE STRENGTH /
SETTING FOR SMALL BATCHES OF COFFEE
To personalize brewing strength for best taste: select 1 bean for Mild,
2 beans for Medium, and 3 beans for Strong. When preparing small
amounts of coffee (up to 4 cups), we recommend that you use the
"SMALL BATCH" setting, which is designed for this purpose.
22
1. Press the "STRENGTH" (N) button once. (Fig. 18) The coffee bean
strength on the LCD screen will flash.
2. Press the "PROG" button (K) to adjust the coffee strength: 1 bean,
2 beans, 3 beans, or SMALL BATCH. (Fig. 19 and 20)
3. After you have done this, the coffee strength selection on the LCD
screen will flash for five seconds and the strength will be set.
USEFUL INFORMATION AND TIPS
When preparing small amounts of coffee (up to 4 cups), we
recommend that you use the "SMALL BATCH" setting, which is
designed for this purpose.
MUTE / UNMUTE THE MACHINE
1. If you want to mute the machine so that it does not make a sound
to alert the end of the brew cycle, press the "PROG" (K) and
"STRENGTH" (N) buttons together. Hold for three seconds. The
mute icon will be displayed on the LCD screen.
2. If you want to unmute the machine so that it makes a sound to alert
the end of the brew cycle, press the "PROG" (K) and "STRENGTH"
(N) buttons at the same time. Hold for three seconds. The mute
icon will disappear from the LCD screen.
CLEANING & MAINTENANCE
„ Unplug the appliance from the wall socket outlet, and allow the
coffee maker to completely cool down.
„ Do not clean the appliance while it is still hot.
„ To dispose of the used coffee grounds, empty the permanent
filter or discard the paper filter from the funnel.
„ Wash the permanent filter, funnel, thermal carafe, thermal carafe
lid, and measuring spoon with warm water and dish soap.
Note: These parts are also dishwasher safe.
„ Clean coffee maker with a cloth or damp sponge.
„ Never use strong detergents or abrasive cleaners on any part of
the machine.
EN
23
Publicidad
