Publicidad
GB
ROADY
7_ Pull the headrest handle upward to adjust the height of the headrest. Adjust the height to the right position
according to the different heights of the child._A_Adjusting the headrest in proper position, Attention:belt
guider is 1-2 fingers higher than child's shoulder.
Please do not use this cushion when the height of the child exceeds 87cm
C
Point Harness storage
1_ Detached shoulder protector from webbing , store the shoulder protector in proper position.
2_ Unlock the buckle, adjust the harness to longest length put the lower buckle in storage under the cover ,
store the upper buckle in separate slot storage under EPE. Make the fabric smooth.
100-150cm: 1. ISOFIX Accesorios+Cinturón de seguridad de 3 puntos
2. Cinturón de seguridad de 3 puntos
ATTENTION
1. This ECRS seat is installed forward and suitable for children with height of 100-150cm.
2. Suitable for models with ISOFIX systems which pass ECE R14 and with three-point seat belt/seat belt with a
retractor which pass ECE R16.
3.Don't use force-bearing points without marking
4. Pls store 5point harness and reducer before stare use baby car seat.
D
1. ISOFIX ATTACHMENTS+THREE-POINT CAR SEAT BELT
1_ Pls store the top tether in the storage on the backrest .
DO NOT USE TOP TETHER WHEN USING ADULT SAFETY BELT
2_ Store the harness as figure , check the hard parts not stand out the fabric .no hard touching feeling on fabric.
3_ Adjust the seat in upright position . only upright position is available for 100-150cm.
4_ Press the ISOFIX button at the bottom of the seat forward and back ward with your hand, push the ISOFIX
on both sides to the maximum, press the end of the ISOFIX, and it will not be retracted.
5_ Insert the connector to the vehicle isofix attachments until hearing "click" and the indicator shows green. if
not insert correctly, the indicator will always show red.
6_ Put the child on the s seat, adjust the headrest to the proper position, the guide hook is slightly higher 1-2cm
finger than the child's shoulder, and the diagonal seatbelt into the green guide under the headrest. both
seatbelt pass the green guider under armrest ,click the metal parts into the buckle ofcar.
Check that the belt is not twisted and tighten the seatbelt by pulling the diagonal belt upwards. Check that
the lap belt is located as low as possible, across the thighs and not around the tummy.
Dont use force-bearing points without marking.
DO NOT USE TOP TETHER WHEN USING ADULT SAFETY BELT
2. THREE-POINT CAR SEAT BELT
1_ Pls store the top tether in the storage on the backrest .
DO NOT USE TOP TETHER WHEN USING ADULT SAFETY BELT
2_ Put the child on the s seat, adjust the headrest to the proper position, the guide hook is slightly higher 1-2cm
finger than the child's shoulder, and the diagonal seatbelt into the green guide under the headrest. both
seatbelt pass the green guider under armrest ,click the metal parts into the buckle of car.
Check that the belt is not twisted and tighten the seatbelt by pulling the diagonal belt upwards. Check that
the lap belt is located as low as possible, across the thighs and not around the tummy.
Dont use force-bearing points without marking.
DO NOT USE TOP TETHER WHEN USING ADULT SAFETY BELT
20
GB
ROADY
IMPORTANT: DO NOT USE THE FACING-FACING SEAT BEFORE THE CHILD REACHES 15 MONTHS OF
AGE (See instructions).
E
CLOTH REMOVING
1_ Remove small cushion and shoulder protector , detach the fabric from seat .detach the main fabric:
Detach snap , remove the fabric.
MAINTENANCE
The cover can be machine washed using mild detergent and at a maximum temperature of 30ºC Please see
the washing instructions on the care label of the cover.
Do not tumble dry as this could cause the padding to come away from the fabric.
Do not expose the upholstery to sunlight for prolonged periods, when the seat is not in use cover it up or
store it in the vehicle boot.
The plastic parts can be cleaned with a damp cloth and neutral detergent.
GUARANTEE INFORMATION
- This item is guaranteed against manufacturing defects as stipulated in the legal Directives and/or regulations
in force on guarantees for consumer goods applicable to the European Union and those of the country in
which it is marketed.
- It is essential to present the purchase invoice or receipt in order to process the guarantee through the seller
of the item or, failing that, through the manufacturer.
- The guarantee excludes anomalies or faults caused by misuse, non-compliance with the safety regulations
and instructions for use and maintenance provided, or due to wear and tear caused by normal use and regular
handling of the item.
- The label containing the serial number of your model must not be torn off under any circumstances as it
contains information relevant to the guarantee.
21
Publicidad
