Publicidad
Idiomas disponibles
Idiomas disponibles
Installing your new appliance
Before using the appliance for the first
time, you should be aware of the
following tips.
For proper installation, this
refrigerator must be placed on a
level surface of hard material that
is the same height as the rest of
the flooring. This surface should be
strong enough to support a fully
loaded refrigerator.
The rollers, which are not casters,
should be only used for forward or
backward movement. Moving the
refrigerator sideways may
damage your floor and the rollers.
Ventilation of appliance
In order to improve efficiency of the
cooling system and save energy, it is
necessary to maintain good
ventilation around the appliance for
the dissipation of heat. For this
reason, sufficient clear space should
be available around the refrigerator.
Warning
Suggestion
It is advisable for there to be at
least 2"( 50mm) of clearance from
the back of the fridge to the wall, at
least 1/2"(12mm) of clearance
from its top, at least 1/2"(12mm)
from its side to the wall and a clear
space in front to allow the doors to
open 125°, as shown in the
following diagram.
1/2 Above
2 Behind
"
1/2 Each Side
This appliance performs well
within the climate class from N to
T shown in the table below. It may
not work properly if left at a
temperature above or below the
indicated range for a long period.
"
"
Note
12
Publicidad
