Descargar Imprimir esta página

Mora MRM260N6TSE Guía De Uso Y Cuidado página 15

Publicidad

Idiomas disponibles

Idiomas disponibles

Installing your new appliance
Ambient temperature
Climate class
SN
N
ST
T
Stand your appliance in a dry place to
avoid high moisture.
Keep the appliance out of direct
sunlight, rain or frost. Stand the
appliance away from heat sources
such as stoves, fires or heaters.
Adjusting Door Height And Door Gap
The height of a door can be adjusted
using the provided Snap Rings.
Tools you will need:
Snap Ring (4pcs)
To Adjust The Height Of Door
1. Check the height difference
between the doors and then lift and
hold the lowest door to be even with
the other.
2. Insert a suitably sized Snap Ring
between the Door and the Hinge as
shown.
+50°F to + 90°F
+61°F to + 90°F
+61°F to + 100°F
+61°F to + 109°F
Wrench(Not provided)
Important
1. Insert only one Snap Ring. If you
insert two or more Snap Rings,
they may slip out or cause a
rubbing noise.
2. Do not raise the door too
much.
The door may contact and
damage the top cover.
3. Save remaining Snap Rings for
possible future use.
Warning
Contains Small Parts, Keep the
Snap Rings Away From Babies
and Children.
13

Publicidad

loading