Publicidad
Idiomas disponibles
Idiomas disponibles
7. Discharging
7.1 AC Discharging
Item
2 × AC Outlet
Note:
Do not apply AC70P to loads higher than 1000W, as this may cause damage to AC70P and your
devices.
7.2 DC Discharging
Item
Cigarette
Lighter Port
2 × USB-A Port
2 × USB-C Port
Note:
To ensure optimal performance, avoid short-circuiting the ports and keep them dry during
use or storage. Additionally, do not block or cover the ports while ensuring proper ventilation.
8. Settings
The AC70P offers the convenience of adjusting its settings either via physical buttons or
BLUETTI App. With the buttons located on the device itself, you have direct control over
various settings such as ECO Mode, output frequency, charging modes, and other
functionalities. Additionally, by using the BLUETTI App, you can access a user-friendly
interface on your phone to conveniently monitor and control the AC70P.
8.1 Setting Mode
When the AC70P is powered on, press and hold the AC and DC power buttons for about
2 seconds till the frequency indicator flashes to enter Setting Mode.
Press and hold the AC and DC power buttons at the same time to exit Setting Mode.
Note: If you do not perform any operation in 1 minute, the AC70P will automatically exit
Setting Mode and no changes will be saved.
16
EN
JUST POWER ON
Specifications
120V
50Hz / 60Hz
Specifications
12V / 10A
5V / 2.4A
5 / 9 / 12 / 15 / 20V, 3A; 20V, 5A
Compatible Loads
Appliances up to 1000W power.
e.g., air conditioners, refrigerators
Compatible Loads
12V DC appliances up to 120W power.
e.g., car refrigerator, air conditioner
Mobile phones and other small loads.
Mobile phones, laptops, etc.
Publicidad
