Publicidad
Idiomas disponibles
Idiomas disponibles
Appx. 2 FAQs
Q1:
How do I know whether my devices will work well with this product?
A:
Please evaluate the total constant load of your devices. If it doesn't exceed the Max.
output power of AC70P (1000W), you can use this power station to run your devices.
Note: Some devices with built-in motor or compressor may start at 2-4 times the
rated power, which can easily overload the AC70P.
Q2:
Can I use third-party solar panels to charge this product?
A:
Yes, you can. However, make sure your solar panels have an open circuit voltage of
12V-58V and are equipped with MC4 connectors. It's also important not to mix
different types of solar panels.
Q3:
Can it charge and discharge at the same time?
A:
Yes. It supports pass-through charging. The AC70P comes with the premium LiFePO
battery and proprietary Battery Management System to ensure that it can charge
and discharge at the same time.
Q4:
What is ECO Mode and can I turn it off?
A:
ECO Mode helps save power, and you can turn it on or off on the screen. When
operating on ECO Mode, the AC / DC output will automatically turn off if the AC70P
is bearing low or no load for a while. You can set the power threshold of AC output
and DC output to 10W-30W / 5W-10W, respectively, for 1, 2, 3, or 4 hours.
Why is the charging power often too low?
Q5:
AC70P has a built-in intelligent BMS that automatically adjusts the charging power
A:
in response to the battery temperature and SoC, thus protecting the battery and
extending its service life.
22
EN
JUST POWER ON
4
Publicidad
