lifter EY15L Manual De Uso Y Mantenimiento página 66

Description / Operating instructions
EN
BATTERY DISCHARGE INDICATOR (BDI) AND ERROR CODE INDICATOR
(POS. 3)
The display screen will show remaining charge left in the battery and also will list
any active fault codes.
LOWER BUTTON (POS. 4)
Press this button to lower the forks.
LIFT BUTTON (POS. 5)
Press this button to lift the forks.
BELLY SWITCH - REVERSING BUTTON (POS. 6)
It is a device located at the tiller end to reverse the direction of travel when it is
hit. It works during the truck travel on the operator direction. If bumped, the truck
reverses and stops immediately. To reset the truck functions it is necessary to turn
the truck off and then on again.
POWER SWITCH (EMERGENCY STOP BUTTON) (POS. 7)
By pressing it, the battery supply is disconnected and all the electric controls are
disabled (Button down: electrical system disconnected).
To reset, pull the button and move the tiller to the vertical position (Button up:
electrical system connected).
By pressing it, it also acts as an emergency
7
brake (the electromagnetic brake engages).
EN66 - Use and maintenance manual