lifter EY15L Manual De Uso Y Mantenimiento página 83

REPLACE SEAL KITS
1. Disconnect the battery.
2. Use a hook head wrench to unscrew the upper part of the cylinder (item 1), and
remove the upper part from the rest of the cylinder (item 2).
3. Remove guide ring (item 3) and guide sleeve (item 4).
4. Pull out piston (item 5).
5. Remove dust ring (item 6), seal ring (item 7), and step seal (item 8). Replace
all with new parts.
6. Reinstall piston into the top of the upper cylinder. Install in the direction of the
arrow in the image, and be careful not to damage the seals.
7. Reinstall guide sleeve and guide ring. Reinstall upper cylinder into the rest of
the cylinder.
8. Reconnect the battery.
Maintenance / Battery
Use and maintenance manual - EN83
EN