Replace The Drive Wheel - lifter EY15L Manual De Uso Y Mantenimiento

Maintenance / Battery
EN

REPLACE THE DRIVE WHEEL

1. Disconnect the battery.
2. Support the truck on blocks so that the drive wheel (item 9) is off the ground.
3. Remove 3 bolts (item 8) from controller cover (item 7), then remove the
controller cover.
4. Remove 4 bolts (item 4) from the nut cover (item 3), then remove the nut cover.
5. Remove nut (item 2).
6. Gently tap the wheel shaft (item 10) and pull it out of the drive wheel.
7. Remove the drive wheel.
8. To install the drive wheel, perform these steps in reverse order.
9. Reconnect the battery.
Use and maintenance manual - EN79