Publicidad
Idiomas disponibles
Idiomas disponibles
USING THE FOOD PROCESSOR
ATTACHING THE WORK BOWL COVER
NOTE: Be sure to install the desired accessory before attaching the work bowl cover.
Place the work bowl cover on the
work bowl with the feed tube just
to the left of the work bowl handle.
1
Grasp the feed tube and turn the
cover to the right until it locks into
place.
NOTE: Your Food Processor will not operate unless the work bowl and work bowl cover
are properly locked on the base, and the large pusher is inserted to the maximum fill
line on the feed tube (approximately halfway down).
INSTALLING THE ADJUSTABLE SLICING DISC
Hold the slicing disc by the finger
grips and lower it onto the drive
1
adapter. You may need to turn the
disc/drive adapter until it drops down
into place.
TIP: You may need to turn the disc/adapter until it drops down into place.
Fit the food pusher into the 2-in-1
feed tube. See "Using the 2-in-1 Feed
2
Tube" for details on working with
different sized foods.
Install the work bowl cover, being sure
2
it locks into place.
USING THE FOOD PROCESSOR | 7
Publicidad
