VALBERG CF 198 E W625C Instrucciones De Uso página 16

B
Setting the temperature
(For settings of -30 °C/-22 °F, an ambient temperature of 25 °C/77 °F or lower is
recommended)
• By pressing the "
pressing the "
1 degree Celsius/Fahrenheit;
• The specific temperature change is cycled according to the figure below:
Centigrade temperature setting range:
Fahrenheit temperature setting range:
Thermostat setting for ambient T°C : NORMAL ≈ +24°C (± 4°C) : 3°C/-19°C
Thermostat setting for ambient T°C : COLD ≈ +16°C (± 4°C) : 3°C/-20°C
Thermostat setting for ambient T°C : HOT ≈ +32°C (± 4°C) : 3°C/-18°C
Super-freeze function
Activating super-freeze:
1
• By pressing the "
• When setting the centigrade temperature, " -30 " will be displayed in the temperature
display. If the compressor is operating continuously, the centigrade temperature indicator
light " " will come on.
• When setting the Fahrenheit temperature, " -22 " will appear in the temperature display.
If the compressor operates continuously, the Fahrenheit temperature indicator light " "
will come on.
Exiting super-freeze:
1
Powering on after power error;
2 Continuous compressor operation for 24 hours;
3
If a sensor error occurs in super-freeze mode, you can exit super-freeze mode;
4 In super-freeze mode, you can exit super-freeze mode by pressing the "
High temperature alarm
The indicator light "
Using the appliance
" key, the display will show the refrigerator temperature, and by
" key once each time, the refrigerator temperature will be adjusted by
" key, the super-freeze indicator light "
" will come on to indicate a high temperature alarm.
9 EN
" will come on;
" key again.