Publicidad
Idiomas disponibles
Idiomas disponibles
CARE AND MAINTENANCE
Occasional
care and maintenance
of the unit and the software
are needed to optimize
the performance
of your unit.
To
clean the
cabinet
Use a soft and-dry cloth.
If the surfaces
are extremely
dirty,
use a soft cloth
lightly
moistened
with mild detergent
solution.
Do not use strong
solvents,
such as alcohol,
benzine
or thinner
as these
could
damage the finish of the unit.
To clean the heads and tape paths
After every
10 hours of use, clean the heads and tape paths
with a head cleaning
cassette
or cotton
swab moistened
with
cleaning
fluid or denatured
alcohol,
(These
cleaning
kits are
commercially
available.)
When cleaning
with a cotton swab, wipe the recording/playback
head, erasure
head, capstans,
and pinchrollers.
R%ead
CottonSwab
I
Pinchroller
Erasure head
Pinchroller
\
Care of discs
When a disc becomes
dirty, wipe the disc from the center out
with a cleaning
cloth.
After playing a disc, store the disc in its case. Do not leave the
disc in places that are hot or humid.
Care of
tapes
Store tapes in their cases after use.
Do not leave tapes near magnets,
motors,
television
sets, or
any source
of magnetism.
This will downgrade
the sound
quality and cause noise.
Do not expose tapes to direct sunlight,
or leave them in a car
parked in direct sunlight.
After
cleaning
the heads
and tape paths
with a liquid
head
cleaning
cassette
or a moistened
swab, wait until the cleaned
parts are completely
dried before inserting
the tapes.
ENGLISH
18
Publicidad
