Publicidad
Idiomas disponibles
Idiomas disponibles
To stand the AM antenna on a surface
Fix the claw to the slot,
~
To position the antennas
FM feeder antenna:
Extend this antenna
horizontally
in a T-shape
and fix its ends to
the wall.
AM loop antenna:
Position to find the best direction.
m
Do not connect any speakers
to the unit other than the supplied
ones.
Do not leave objects generating
magnetism
near the speakers.
Do not bring the FM antenna near metal objects or curtain rails,
Do not bring the AM antenna
near other optional
equipment,
the stereo system
itself, the AC cord or speaker
cords, since
noise will be picked up.
Do not unwind the AM antenna
wire.
CONNECTING
AN OUTDOOR ANTENNA
For
better
FM reception,
use
of an outdoor
antenna
is
recommended.
Colnnect the outdoor
antenna
to the FM 75 Q terminals.
I To connect other optional equipment+
page 17.
I
REMOTE CONTROL
Inserting batteries
Detach the battery cover on the rear of the remote control
and
insert two R6 (size
AA)
batteries.
R6(AA)
When to replace the batteries
The maximum
operational
distance
between
the remote control
and the sensor on the main unit should be approximately
5 meters
(16 feet).
When this distance
decreases,
replace the batteries
with new ones.
Using the remote control
The instructions
in this manual refer mainly to the buttons on the
main unit. Buttons
on the remote control with the same names
as those on the main unit can be used as well.
m
The
button on the remote control has the same function
as
that of the <b
button on the main unit,
If the unit is not going to be used for an extended
period of
time,
remove
the batteries
to prevent
possible
electrolyte
leakage,
The remote control may not operate
correctly
when:
- The line of sight between
the remote control and the remote
sensor on the left top of the front panel (see the illustration
of
"BEFORE
OPERATION")
is exposed
to intense
light, such
as direct sunlight
- Other remote controls
are used nearby (television,
etc.)
SHIFT
FUNCTION
(D
To use the SHIFT button
Buttons (!) have two different
functions,
One of the functions
is
indicated
on the button,
and the other on the plate above the
button,
To use the function
on the button, simply press the button,
To use the function
on the plate above
the button,
press the
button while pressing
the SHIFT button.
To use the FUNCTION button
The
FUNCTION
button
substitutes
for the function
buttons
(TAPE,
TUNER,
AUX,
CD) on the main
unit. Each time the
FUNCTION
button is pressed while power is on, the next function
is selected
cyclically,
ENGLISH
4
Publicidad
