GB
Brush / Pad Weight
12.5 kg
Vac Motor
Clean Tank
Max Power
100W
*Run Time
*60-80 Min
PROBLEM
Machine will not operate
Vacuum will not operate
Poor water pick-up
Failure to rectify the problem or in the event of a breakdown contact your Numatic dealer or
Model - NUC244NX-R
Brush / Pad
Cleaning Area
Pressure
2
1320 m
2
Pad 20.10
Waste Tank
2.2 L
3 L
*Recharge Time
*1 Hour (80%)
*2 Hours (100%)
*Run and Recharge times may vary dependent on ambient temperature.
CAUSE
Battery not connected
Low battery charge
Vacuum not turned on
Waste-water tank full
Loose hose connections
Poor separator seal
Damaged separator seal
Low battery charge
Brush overloaded
Clean-water tank empty
Blocked clean water tank outlets
Numatic Technical helpline +44 (0)1460 269268
Brush Motor
Power
2
2 x 200W
Gross Weight
Water
Ingress
25.5 kg
Dimensions
Width = 520 mm
Length = 450 mm
Trouble Shooting
SOLUTION
Connect battery (page 25)
Charge battery (page 53)
Turn on vacuum (page 29)
Empty waste-water tank (page 41)
Remove and clean (page 15)
Push tight connections (page 15)
Clean (page 37)
Renew (Spare parts page 116)
Renew (Spare parts page 116)
Renew (Spare parts page 116)
Recharge battery - see battery charger manual
Reset the machine and decrease the brush load
Fill clean-water tank (page 21)
Remove and clean (page 37)
55
55
Brush Speed
Brush / Pad Width
2 x 220mm
140 rpm
Nett Weight
21.3 kg
Hand Arm
Sound Pressure
Vibration
(440mm)
Rating
500W