Yakima MOD GearCrate Manual Del Usuario página 2

1
INSTALL THE REAR CATCH.
A
A. Loosely assemble 2 M6 screws,
the rear catch, and 2 M6 nut
plates together, as shown.
B. Insert one side of the rear catch into the slot at the rear of your HomeBase or Topper. Slide the rear
catch over and insert the other side of the catch into the slot. Then, position the rear catch where you
want to install your GearCrate and ensure it is centered. Finally, using the wrench, fully tighten to 3 Nm.
2
INSTALL THE FRONT CATCH.
A. Loosely assemble 2 M6 screws,
the front catch, and 2 M6 nut
plates together, as shown.
A
B. Insert one side of the front catch into the slot at the front of your HomeBase or Topper. Slide the front
catch over and insert the other side of the catch into the slot. Then, position the front catch where you
want to install your GearCrate, aligned with the rear catch. Finally, using the wrench, fully tighten to 3 Nm.
3
FOLD UP THE GEARCRATE.
Fold each of the 4 walls up.
Instruction #1036303A-2/7
B
B
3 Nm
4
ATTACH THE INNER CORNERS.
With the flaps
of the walls
overlapping,
align the holes,
and place the
inner corners,
inserting their
attachment
hooks through
the holes.
3 Nm
X Nm
4X 4X