Yakima MOD GearCrate Manual Del Usuario página 3

5
ATTACH THE OUTER CORNERS.
Place the outer
corner by hooking
the corner pieces
together and
rotating into place,
as shown. Press
the outer corner
firmly against the
inner corner until it
snaps into place.
6
FASTEN THE CORNERS.
Using the wrench, install a corner
screw at each corner where shown,
and tighten it completely to .5 Nm.
7
INSTALL THE DIVIDER.
OPTIONAL: Install the
divider by placing it in one of
the availiable positions. Use
the hook and loop fastener
to secure it into place.
Instruction #1036303A-3/7
.5 Nm
4X 4X
4X 4X