Porsche Classic Manual Del Usuario página 5

Overview
1 6V mode LED
12V mode LED
2
3 Error LED
Stand-by / Charging LED
4
5 PVC cable
6 DC Connector
Fuse
7
8 Torch
Clips
9
Ring Terminals
OD: 12 mm, ID: 8,4 mm
Backlight
Main Cable
Supply plug
Setup
1. Connect the mains cable to the socket on the bot-
tom of the charger.
2. Remove the cover on the red clip by using a screw
driver and take out the button cell battery (see
page 10).
3. Remove the insulation material underneath the
button cell battery. The contact spring must be ex-
posed.
4. Insert the button cell into the recess in the correct
position (+) symbol facing upwards and replace
the cover (see page 10).
5. Connect the PORSCHE connector on the charger
to the clip terminal or the ring terminal cable set.
6. Your PORSCHE Classic charger is now ready for
use.
5