YATO YT-82555 Manual Original página 14

PRODUCT OVERVIEW
The painting unit is a combination of a paint gun and a compressor supplying compressed air for spray painting. Such solution
makes the gun lighter and easier to use while painting. Capacious paint container combined with high performance ensure smooth
operation. The correct, reliable, and safe operation of the appliance depends on its proper use, therefore:
Read the entire manual before the fi rst use of the device and keep it for future reference.
The supplier shall not be held liable for any damage resulting from failure to observe the safety regulations and recommendations
specifi ed in this manual.
EQUIPMENT
The packaging should include: compressor housing, hose connecting the gun to the compressor, sprayer gun, paint container,
and viscometer.
TECHNICAL DATA
Parameter
Catalogue No.
Mains voltage
Mains frequency
Rated power
Electrical protection class
Weight
Tank capacity
Rated capacity
Nozzle diameter
Noise level
pressure LpA ± K
power output LwA ± K
Vibration level ah ± K
Protection rating
The declared noise emission value has been measured using the standard test method and can be used to compare one tool to
another. The declared noise emission value can be used in the preliminary exposure assessment.
The declared total vibration value has been measured using the standard test method and can be used to compare one tool to
another. The declared total vibration value can be used in the initial exposure assessment.
Caution! The vibration emission during tool operation may diff er from the declared value, depending on the manner the tool is used.
Caution! Safety measures to protect the operator, which are based on an assessment of exposure under actual conditions of use
(including all parts of the work cycle, such as the time when the tool is switched off or idle and the activation time), must be specifi ed.
GENERAL WARNINGS FOR THE SAFETY OF POWER TOOLS
Warning! Read all safety warnings, illustrations and specifi cations provided with this
power tool. Failure to do so may result in electric shock, fi re or serious injury.
Keep all warnings and instructions for future reference.
The term "power tool" used in warnings applies to all tools driven by power both wired and
wireless.
Workplace safety
Keep the workplace well-lit and clean. Disorder and poor lighting can be causes of acci-
dents.
Do not work with power tools in an environment with an increased risk of explosion,
containing fl ammable liquids, gases or vapors. Power tools generate sparks that can
O R I G I N A L
14
EN
Unit
[V~]
[Hz]
[W]
[kg]
[l]
[l/min]
[mm]
[dB(A)]
[dB(A)]
[m/s2]
I N S T R U C T I O N S
Value
YT-82555
220 – 230
50/60
1380
II
6.2
0.8
1
1.0/1.8/2.6
85.20 ± 3.00
96.20 ± 3.00
< 1.5
IPX0