G
UK
Before use, check that the safety
seat has all of its parts. Make sure
it is in good condition, as this will
reduce the risk of an accident.
Before use, check that the seat belts
are not too loose. Do not expose
the safety seat to excessively
col d o r ho t temperat u re s or
damp environments. Keep the
instruction manual in a safe
place. In the event of an accident,
replace the car seat with a new
one. Contact your retailer if you
have any questions.
B E F O R E U S E , R E M O V E A N D
DISPOSE OF ALL PLASTIC BAGS
AND PACKAGING MATERIALS AND
KEEP THEM OUT OF REACH OF
CHILDREN. IT IS RECOMMENDED
TO DISPOSE OF THESE ITEMS
AT A N A P P R O P R I AT E W A ST E
SORTING POINT, AS REQUIRED
B Y C U R R E N T R E G U L AT I O N S .
1. Open the support leg and pull
outward. When you hear a click, the
support leg is in place.
2. Press the support leg release button
and lower the inner part of the
support leg to support the bottom
surface. Note that the bottom
surface should lie completely flat
against the contact surface. When
the upper indicator turns green, it is
correctly installed.
3. If the indicator is red, the support
R388_CRONO_(KX 115)_Libretto_v5ok.indd 36
R388_CRONO_(KX 115)_Libretto_v5ok.indd 36
C
iordani
rono
WARNING!
SUPPORT
LEG INSTALLATION
car seat
leg is not properly installed; if the
indicator turns green, the support
leg is properly installed.
THE SUPPORTLEG
4. Retracting the leg: Press the
button below the base (circled in
red) to retract the support leg.
ROTATION FUNCTION
5. Use two fingers to pull the
rotation button once, and with
your other hand rotate the main
body of the seat until you hear
it click into place. Check that
the rotation indicator is green.
ATTENTION:
activates once the support leg has
been fully opened.
PROTECTOR FUNCTION
6. Your car seat is fitted with a
spacer which, in the event of side
impact, creates some distance
between the side of the seat
and the collision zone. This SIP
should be activated on the side
nearest the vehicle door.
I-SIZE UNIVERSAL (40-105 cm):
ISOFIX+- SUPPORT LEG+
FIVE-POINT HARNESS
ATTENTION:
• Suitable for models with ISOFIX
systems compliant with ECE R14.
• This i-size seat is installed in the
rearward facing position, suitable
36
RETRACTING
the rotation function
SIDE IMPACT
for
cm
the
• i-si
o n
airb
• IMP
THE
BEF
OL
ma
• IMP
not
wh
I-SIZE
7. Ex
it
in
8. Pr
bo
ba
th
si
pr
w
9. In
of
co
of
lo
w
sy
ar
w
sy
10. Pu
ag
se
si
at
10/11/23 14:11
10/11/23 14:11