Descargar Imprimir esta página

cecotec Bolero CoolMarket Combi Origin 300 Manual De Instrucciones página 44

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 37
ENGLISH
1.PARTS AND COMPONENTS
Fig. 1
1.
Fan
2.
Switch
3.
Light and temperature knob
4.
Glass shelf
5.
Drain pipe cap
6.
Glass cover
7.
Crisper drawer
8.
Top drawer
9.
Bottom drawer
10. Egg holder
11.
Middle bottle holder
12.
Large bottle holder
Note:
The graphics in this manual are schematic representations and may not exactly match the
appliance.
2. BEFORE USE
-
This appliance is packaged in a way as to protect it during transport. Take the appliance
out of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent damage to the appliance
when transporting it in the future. In case the original packaging is disposed of, make sure
all packaging materials are recycled accordingly.
-
Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
3. INSTALLATION
Installation
1.
Place the refrigerator on a completely flat surface. Leave 5~10 cm between each side of
the appliance and the wall, and 30 cm between the top of the appliance and the ceiling.
2. Choose a place that is not exposed to sunlight, high temperatures, or humidity, as
moisture can cause stains.
3. Remove the bottom panel before installation.
4. The appliance can be adjusted via its two front support feet. You can raise the appliance
by turning them clockwise.
44
BOLERO COOLMARKET COMBI ORIGIN 300 RED/BEIGE/BLACK/BLUE/GREEN E

Publicidad

loading

Este manual también es adecuado para:

0275902757027600275602758