Publicidad
Idiomas disponibles
Idiomas disponibles
7
1
st
Drill a 1/8"
hole, centered
in exterior slot only.
Clamp at the top to hold in place until fastened. Slide the Mounting Bracket down to the Sill Adaptor. Drill a 1/8" hole, clear debris,
and fasten with a #8 x 3/8" Self-Drilling Black or Stainless Steel Screw.
9 2 0 5707
200/400 Series Shown
(Positioning, drilling
and fastening Mounting
Bracket is the same for
all series).
·
Failure to do so could result in
surface marring or product damage.
NOTICE
·
Only drill through
first wall of component
part, typically about
1/8". Failure to do so
could result in product
or property damage.
2
nd
Fasten with
#8 x 3/8" Self-Drilling
Black or Stainless Steel Screw.
17
200/400 Series
#8 x 3/8"
Self-Drilling
Black or Stainless Steel Screw
NOTICE
Protect surfaces from tool contact.
A-Series
A-Series
E-Series
E-Series
Publicidad
