8
Drill a 1/8" hole, centered
in interior slot only.
1
st
Verify Retractable Insect Screen is tight to Head Track Retainer and reclamp.
Slide the Mounting Brackets to the Head Track Retainer. Drill a 1/8" hole, clear
debris, and fasten with a #8 x 3/8" Self-Drilling Black or Stainless Steel Screw.
9 2 0 5707
200/400 Series Shown
(Positioning, drilling
and fastening Mounting
Bracket is the same for
all series).
NOTICE
·
Only drill through first wall of
component part, typically about
1/8". Failure to do so could result
in product or property damage.
·
Protect surfaces from tool contact.
Failure to do so could result in
surface marring or product damage.
Fasten with #8 x 3/8"
Self-Drilling Black or
Stainless Steel
Screw.
2
nd
18
200/400 Series
A-Series
A-Series
E-Series
E-Series
#8 x 3/8"
Self-Drilling
Black or Stainless Steel Screw
NOTICE
Installation
is complete.