Publicidad
Idiomas disponibles
Idiomas disponibles
Function / Error message
ON/OFF button
Zeroing
Battery symbol &
Charging status
Err2
Err3
Err4
Err8
null
FULL
LH
Description
The on/off button can be used to switch the
device on and off. A self test is carried out
automatically when the device is switched on.
After a successful self-test, the zero weight
0.000 g is shown on the display.
The scale can be zeroed by pressing the "-> 0 <-"
button and the zero weight is shown on the
display. This procedure is only possible within a
range of ± 2 % of the maximum load. If the value
exceeds this range, the display shows the error
message "<Err2>" and emits an acoustic signal.
Zeroing is only possible when the display is
stable.
If the voltage level is too low during battery
operation, the battery symbol appears on the
display. This indicates that the battery should be
charged immediatly. The battery can be charged
using the supply power; mains operation is also
possible. The charging status of the battery can
be displayed by pressing the "ESC+T" button
combination.
Value outside the zero range.
Value outside the tare range.
Adjustment or start weight outside the
corresponding range.
Time limit exceeded during taring, zeroing,
determining the start weight or during the
adjustment procedure.
Zero value of the converter.
Weighing range exceeded.
Start weight error: Start weight outside the
corresponding range (-5 % to +15 % of the start
weight). For example, if the measuring head has
not been screwed on or the weighing plate has
been damaged.
25
Publicidad
