Descargar Imprimir esta página

Cub Cadet Pro Z SurePath Manual Del Operador página 26

Cortadora con radio de giro cero

Publicidad

Idiomas disponibles

Idiomas disponibles

MAINTENANCE SCHEDULE
Before cleaning, repairing, or inspecting, make certain the blade(s) and all
moving parts have stopped. Turn off the engine, remove the key, disconnect
the spark plug wire(s) and the negative battery cable to prevent unintended
starting. Always wear safety glasses or safety goggles during operation and
while performing an adjustment or repair to protect your eyes.
Check Gasoline Level
Check Hydraulic Hoses for Leaks
Check Tires & Tire Pressure
Check Deck, Mower & Hydro Drive Belts
Check Blades & Blade Bolt Tightness
Check Safety Switches for Proper Operation
Check Fluid Level in Transmission Oil Expansion Reservoir
Check/Clean Engine Intake Screens & Cooling Fans *
Check/Clean Exhaust Manifold, Muffler Pipe & Muffler Shields *
Check/Clean Top & Underside of Deck, Under & Around Spindle Covers & Belt Area *
Check/Clean Around Fuses, Wiring & Wiring Harnesses *
Check/Clean Around Transmission, Axle & Fans *
Blow Out/Clean Pump Control Area Under Floor Pan
Blow Out/Clean Pedal Control Area Under Foot Rest
Lubricate Wear Points (see chart)
Clean Engine Cooling Fins & External Surfaces *
Change Hydrostatic Fluid & Filter in Transaxles
(Parker Transmissions) †
Change Hydrostatic Fluid & Filter in Transaxles
(Hydro-Gear Transmissions)
† — After first 300 hours, change hydrostatic fluid and filter in transaxles.
* — Perform more frequently under dusty conditions.
NOTE: This Operator's Manual covers several models. Mower features may vary by
model. Not all features in this manual are applicable to all mower models and the
mower depicted may differ from yours.
POST-OPERATION MOWER CARE
After each operation of the mower, the following procedures should be implemented
to extend the life of your mower and ensure safe operating conditions.
Failure to follow these recommendations may result in serious injury to
yourself or others and may cause damage to the mower.
Cleaning the Underside of the Deck
Rinse grass clippings from the deck's underside and prevent the buildup of
corrosive chemicals.
PRODUCT CARE
WARNING
DANGER
Follow the Maintenance Schedule given below. This chart describes service
guidelines only.
Refer to the Engine Operator's Manual for engine maintenance items listed in the
table below.
Before
Every 50
Each Use
Hours
^ — Or yearly, whichever comes first.
Make certain the mower's discharge chute is directed AWAY from people,
your house, garage, parked cars, etc.
1. Disengage the PTO, set the parking brake and stop the engine.
2. Use a hose to spray the underside of the deck.
NOTE: Make sure that the hose is not routed under the deck and is clear of all
moving parts.
3. After cleaning your deck, return to the operator's position and engage the PTO.
Keep the deck running for a minimum of two minutes, allowing the underside of
the deck to thoroughly dry.
26
Initial 100
Every 400
Every 500
Hours
Hours^
Hours
WARNING
After
Mowing

Publicidad

loading