Ego Power+ MINI BIKE MB1000 Manual Del Usuario página 20

NOTE: Low beam is low intensity and reaches a shorter distance in front of the mini
bike while high beam is high intensity and illuminates a greater distance. Do not use
high beam in foggy conditions.
Riding Mode Selector (Fig. 1d)
This mini bike features three speed
modes. "S" for SPORT mode, "N" for
NORMAL mode and "E" for ECO mode.
Each riding mode sets the maximum
driving speed. Choose a suitable riding
mode by toggling the selector according
to the marks on it.
Lighting Control Button (Fig. 1d)
Controls the lighting system of the mini bike. Slide switch to the desired setting; all
lights on / only running light on
Throttle (Fig. 1d)
A speed controller located on the right end of the handlebar. When you twist the
throttle, the engine speed increases, and when you roll the throttle back, the engine
speed decreases. It allows you to adjust the speed within the range of the selected
riding mode.
DANGER:
Be careful about how you use the throttle. As a beginner, don't rev too
hard. Start slowly until you completely understand how it works. Practice in a safe open
area to get used to this mini bike's acceleration.
DANGER:
Be careful when starting or accelerating. Sudden acceleration may
make the wheels spin and slip, causing the mini bike to slip sideways.
READY Button (Fig. 1d)
Press the button to activate the control system and make the mini bike ready to go.
20
56V MINI BIKE — MB1000/ MB1000-FC
1d
Riding Mode Selector
Ready Lighting Control
Button Button
/ all lights off .
Throttle