Publicidad
Idiomas disponibles
Idiomas disponibles
Brake Fluid
Brake Fluid
Reservoir
Pre-ride Check Details
Component
Visual Inspection
Lights and Reflectors
Tires
Wheels
32
56V MINI BIKE — MB1000/ MB1000-FC
Fill
◾
Visually inspect mini bike for missing or damage parts.
Inspect ground below the brake cable for fluid leakage.
◾
Verify all lights are functional. Both low and high beam
illuminate. Taillight illuminates when turned on and intensity
increases when either brake is applied.
◾
Check the lens and reflectors for cracks. If detected have
damaged items serviced. Contact EGO customer service for
support.
◾
Clean all lights and reflectors.
◾
Use an air pressure gauge (not included) to check the tire
pressure. Fill to 32 psi (220.6 kPa), if needed.
◾
Inspect tires for wear and damages: cuts, punctures or
weather cracks. When the tire is worn and the tread depth
is less than 1/32" (0.8 mm) (see Fig. 7a), contact EGO
Customer Service for replacement.
◾
Ensure wheel is secured and balanced. Grasp a tire at
approximately the 3 and 9 o'clock position on the tire and
apply a twisting motion to the wheel (see Fig. 7b). There
should be no free play or slip as you twist the wheel. For
the front wheel, a second person should hold the handlebar
steady while the other person checks the wheel for play in
the manner described above. If movement is noticed, have
the mini bike serviced immediately. Contact EGO customer
service for support.
After pre-ride inspection, test ride your mini bike in an open
and safe area to assess wheels for runout or vibration. If
excess runout or vibration is detected, have the mini bike
serviced. Contact EGO customer service for support.
Greater than 1/4 full
Action
Left
Right
Publicidad
