Dalbach BO-01 Instrucciones De Uso página 83

EN
Inserting the inner glass plate
1. Replace the glass plate after cleaning.
2. Attach the upper left plastic part.
3. Fix the refrigerating plate to the left plastic part.
4. Attach the right plastic part to the refrigerating plate.
5. Fix the plastic part to the iron frame.
17 Replacing the lamp
If the oven lighting no longer functions properly, you can replace the oven light yourself.
You can obtain this lamp, which is suitable for ovens and must be able to withstand
temperatures of up to 300 °C, from your dealer or ask the Technical Service to replace it
for you at a charge.
Lamp data for oven light (suitable for temperatures up to 300 °C):
voltage
Heat resistance
Table 8 lamp data
1. Set all rotary switches to "0/OFF" and disconnect the mains
power cable.
2. Open the oven door.
3. Unscrew the lamp cover, wash and dry.
4. Unscrew the lamp from the socket.
5. Screw in a new lamp.
6. Screw the lamp cover back on.
7. Plug the mains power cable back into the socket.
Page | 38
230 V Power
T300 Fitting
25 W
G9 (plug-in lamp)