Publicidad
Idiomas disponibles
Idiomas disponibles
Gas Connection
ONLY USE THE REGULATOR AND HOSE ASSEMBLY PROVIDED WITH THIS GRILL.
REPLACEMENT PRESSURE REGULATORS AND HOSE ASSEMBLIES MUST BE THOSE
SUPPLIED BY THE MANUFACTURER
This is a LP (Liquefied Petroleum Gas) configured grill. Do not attempt to use a natural gas
supply unless the grill has been reconfigured for natural gas use. The installation of this
appliance must conform with local codes or, in the absence of local codes, with either the
National Fuel Gas Code, ANSI Z223. 1, or CAN/CGA-B149.2 Propane Installation Code.
•
LP TANK REQUIREMENTS
THE LP TANK USED WITH YOUR GRILL MUST MEET THE FOLLOWING REQUIREMENTS:
1.
Measurement: 12'' (30.5 cm) (Diameter) X 18'' (45.7 cm) (Tall).
2. Maximum Capacity: 20 lbs (9 kg).
3. Constructed and marked in accordance with the specification for the LP tank of the
U.S. Department of Transportation (DOT) or the National Standard of Canada,
CAN/CSA-B339, Cylinders, Spheres and Tubes for the Transportation of Dangerous
Goods. See LP tank collar for marking.
4. Is arranged for vapor withdrawal.
5. Includes a collar to protect the tank valve.
6. Has no dents or rust. A dented or rusty LP tank may be hazardous and should be
checked by your supplier.
7. Provides a shut-off valve in the LP gas tank valve outlet specified, as applicable for
connection type QCC1 in the standard for compressed gas tank valve outlet and inlet
connection ANSI/CGA-V-1.
22
Publicidad
