Bianchi IMPULSO RC Manual Del Usuario página 5

INFORMATION!
New and innovative components and features are being developed all the time.
To check compatibility with drive units other than those originally installed on the Bianchi frame or to receive information and instructions on specific
components that may be required to install a product or upgrade one, please contact your preferred Bianchi retailer.
INTEGRATED HANDLEBAR IMPULSO RC
The integrated handlebar is a component designed specifically for frames in the Impulso range to offer optimum integration between frame, head set and
handlebar.
The Impulso frame uses the ICR head set system manufactured by Acros to route the cables within the handlebar and frame. The handlebar is designed to
integrate seamlessly with the head set.
Handlebar assembly, maintenance and disassembly must be carried out by
a specialist retailer ONLY.
NEVER carry out work on the handlebar. These operations require specific
technical knowledge, tools and expertise and should ONLY be carried out
by a specialist retailer.
Adjusting the height of the handlebar to suit personal requirements
requires expertise, appropriate tools and practical ability. As such, all
adjustments should be carried out by a specialist retailer.
The handlebar stem is attached to the fork by two screws located on the
side of the handlebar and by a tapered nut; the screws are M5x22 mm in
length. The torque of the screws is 5-6 Nm.
5