Bianchi IMPULSO RC Manual Del Usuario página 9

WARNING!
Do not extract, move or adjust the seat post (e.g., to adjust the saddle height) without having loosened the screws on the clamp/expander!
Once the saddle is adjusted to the desired height, tighten the M5 screws and respect the recommended torque value of the clamp/expander (6 Nm). Next,
reposition the rubber cover in its original position.
INFORMATION!
For optimum grip and to eliminate slippage between the seat post and the frame, place a moderate amount of gripper paste on the part of the
expander that is in contact with the seat post. (the gripper paste is included with the product).
DANGER!
The clamp is equipped with M5x35 mm screws; please only use the specified screw. Using a different screw can compromise the tightness of the seat
post clamp/expander and cause the seat post to drop suddenly, resulting in possible falls.
DANGER!
Always comply with the torque levels specified on the seat post/expander clamp. Failure to comply with the recommended torque levels may lead to
malfunction and cause the rider to fall.
SEAT POST
The carbon fibre D Shape seat post is specifically designed for the Impulso RC, PRO and
COMP frame to ensure optimum integration between seat post and frame. Each frame size is
supplied with a seat post of the correct length and design to protect the integrity of the frame.
Always observe the maximum and minimum insertion limits.
300 mm seat post > 47 cm frame (XS)
350 mm seat post > 51 cm (SM) / 55 cm frame (MD)
380 mm seat post > 58 cm (LG) / 59 cm frame (XL)
WARNING!
When removing the seat post never exceed the safety limit indicated on the component.
(image 1E)
ELECTRONIC SHIFTER BATTERY
If using the Shimano Di2 electronic shifting system, the battery is integrated into the seat post using a specific rubber interlocking system (Image 1F and
1G). Always take care when removing the seat post to avoid damaging the battery or the transmission system cables.
1F
WARNING!
Be careful to avoid damaging the cables when extracting the seat post from the frame as the cables may be too short to allow this.
WARNING!
Check that the battery is securely attached inside the seat tube. Incorrect assembly may cause the battery to fall and become damaged.
1E
1G
9