Bianchi IMPULSO RC Manual Del Usuario página 6

DANGER!
Always comply with the torque values specified on the stem. Incorrect tightening may cause the component to malfunction or break, causing the
rider to lose control and fall.
Never use this product with incomplete or incorrect assembly. This endangers not only the rider but also other road users.
WARNING!
Turn the handlebar left and right. Do not use the bike if there is any evidence of abnormal steering (play in the steering or uneven resistance) or if
any cracks or signs of damage are evident.
In the event of an accident or fall, the handlebar will almost certainly be involved and will be subjected to
high levels of stress and impact. In the event of any deep scratches or cracks, replace the components.
WARNING!
If the handlebar is damaged, stop using the Impulso RC bike immediately. Do not use the Impulso RC
bike until a specialist retailer has conducted a full inspection and, if necessary, the handlebar has
been replaced.
The gear/brake control levers are mounted on the handlebar using a clamp integrated into the lever.
Pay close attention to the recommended positioning of the levers and respect the limits indicated by the
high grip zone (image 1A).
Consult the lever product handbook for the correct torque. To preserve the integrity of the handlebar bend,
do not exceed the maximum torque of 10 Nm.
6
1A