FISCHER FXC 85 Manual De Instrucciones Original página 19

duce the risk of starting the power tool accidentally.
· Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained
users.
· Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool's
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
· Keep cutting tools sharp and clean. Properly main-
tained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
· Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations
different from those intended could result in a haz-
ardous situation.
Battery tool use and care
· Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used
with another battery pack.
· Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
· When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another.
· Shorting the battery terminals together may cause
burns or a fire.
· Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact acciden-
tally occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from
the battery may cause irritation or burns.
Service
Have your power tool serviced by a qualified repair
person using only identical replacement parts. This will
ensure that the safety of the power tool is maintained.
Nailer safety warnings
· Always assume that the tool contains nails. Careless
handling of the nailer may result in unexpected firing
of nails and personal injury.
· Do not point the tool towards yourself or anyone
nearby. Unexpected triggering will discharge the
nails causing an injury.
MOAL_FXC-85.indb 19 MOAL_FXC-85.indb 19
· Do not actuate the tool unless the tool is placed firm-
ly against the workpiece. If the tool is not in contact
with the workpiece, the nail may be deflected away
from your target.
· Disconnect the tool from the power source when
the nail jams in the tool. While removing a jammed
nail, the nailer may be accidentally activated if it is
plugged in.
· Use caution while removing a jammed nail. The
mechanism may be under compression and the nail
may be forcefully discharged while attempting to free
a jammed condition.
· Do not use this nailer for fastening electrical cables.
It is not designed for electric cable installation and
may damage the insulation of electric cables thereby
causing electric shock or fire hazards.
· Disconnect the nailer from the power source when
loading and unloading nails, making adjustments or
changing accessories. The nailer may be acciden-
tally activated if it is connected to the power source,
which may result in personal injury.
· Be careful when handling nails, especially when
loading and unloading. The nails have sharp points
which may result in personal injury.
· Keep fingers away from trigger when not operating
this nailer and when moving from one operating
position to another. Unexpected triggering will dis-
charge a nail, which may result in personal injury.
· Hold the nailer by insulated gripping surfaces, when
performing an operation where the nail may contact
hidden wiring. A nail contacting a "live" wire may
make exposed metal parts of the nailer "live" and
could give the operator an electric shock.
· Hold the nailer with a firm grasp during operation.
Uncontrolled recoil of the nailer may result in unin-
tended activation, which may result in personal injury.
· Keep all body parts such as hands and legs, etc.
away from the firing direction of the tool. The nail
may penetrate the workpiece as well as any object
behind it, which may result in personal injury.
· When using the nailer, keep all body parts such as
hands and legs, etc. away from the area where the
nails is driven into the workpiece. The nail could
deflect and exit the workpiece, which may result in
personal injury.
· Use suitable detectors to determine if there are hid-
den supply lines or contact the local utility company
for assistance. Contact with electric cables can
cause fire and electric shock. Damaging gas lines
can lead to explosion. Breaking water pipes causes
property damage.
· In case of damage and improper use of the battery,
vapours may be emitted. The battery can set alight or
explode. Ensure the area is well ventilated and seek
EN
19
13.07.2023 11:23:45 13.07.2023 11:23:45