Descargar Imprimir esta página

Socket Mobile DURASCAN D600 Guia Del Usuario página 11

Ocultar thumbs Ver también para DURASCAN D600:

Publicidad

Idiomas disponibles

Idiomas disponibles

BLUETOOTH CONNECTION PROFILE
Bluetooth Connection Profile button sequence will toggle the D600
between two profiles: HID and Application Mode.
To switch from HID to Application Mode or visa versa,
perform the following steps:
1. Power OFF the D600.
2. Press and hold the trigger button.
3. Press and hold the power button while continuing to press the
trigger button. Hold both buttons for 10 seconds.
4. After 10 seconds, release both buttons. The D600 will play the
Success Melody and it will be powered on and ready to pair in the
new mode.
Note: If either button is released before 10 seconds, the D600 just
performs a normal Power on.
Profile Indications:
HID "Keyboard Emulation" - two tones synchronized with two short
vibrations and two green RFID flashes. After, the RFID light flashes
blue for 75 seconds, or until the D600 connects, or the trigger button
is pressed.
App "D600 Application" – three tones synchronized with three short
vibrations and three green RFID flashes. After, the RFID light
flashes magenta for 75 seconds, or until the D600 connects, or the
trigger button is pressed.
11

Publicidad

loading