Connect Apple iOS device in Application Mode
Please check with your reader application vendor or visit
www.socketmobile.com/appstore
application supports the reader.
If you are using the reader with an Apple iOS device and a
reader-enabled Application that does not provide instructions how to
connect your reader, please use the following steps.
1.
Power on the reader. Make sure the reader is discoverable
(unpaired). The Blue light should be blinking fast.
2. Turn on Bluetooth on the Apple device. Go to Settings >
Bluetooth.
A Bluetooth Devices search will begin
3. Launch your reader-enabled Application. The reader will beep
once indicating that it is connected to the appropriate application.
Now you are ready to read RFID tags!
APPLICATION MODE
to confirm your reader-enabled
23