Publicidad
Idiomas disponibles
Idiomas disponibles
•
Always look down and behind you before and while
you move in reverse. Look out for large and small
obstacles.
•
Decrease the speed before you turn around a
corner.
•
Stop the blades when you move across areas that
you do not cut.
CAUTION:
instructions that follow before you use the
product.
•
Before you operate the product, clear the cold air
intake of the engine from grass and dirt. If the
cold air intake is blocked, there is a risk of engine
damage.
•
Move around stones and other larger objects
carefully and make sure that the blades do not hit
the objects.
•
Do not operate the product across objects. Stop
and examine the product and cutting deck if you
operate the product across or into an object. If it is
necessary, make repairs before you restart.
Personal protective equipment
WARNING:
instructions that follow before you use the
product.
•
Use approved personal protective equipment when
you use the product. Personal protective equipment
cannot fully prevent injury but it decreases the
degree of injury if an accident does occur. Let your
dealer help you select the right equipment.
•
Use approved hearing protection. Long-term
exposure to noise can result in permanent hearing
impairment.
•
Use heavy-duty slip-resistant boots or shoes. Steel
toes are recommended. Do not use open shoes or
go with bare feet.
•
Use protective gloves when necessary, for example
when you attach, examine or clean the cutting
equipment.
•
Do not wear loose-fitting clothing, jewelry or other
items that can get caught in moving parts.
•
Keep first aid equipment and fire extinguisher near.
1903 - 004 - 18.12.2023
Read the caution
Read the warning
Safety devices on the product
WARNING:
instructions that follow before you use the
product.
•
Do not use a product with safety devices that are
damaged or do not operate correctly. Do a check of
the safety devices regularly. If the safety devices are
damaged, speak to your Husqvarna service agent.
•
Do not make modifications on safety devices. Do
not use the product if protective plates, protective
covers, safety switches or other protective devices
are not attached or are damaged.
To do a check of the ignition lock
•
Start and stop the engine to do a check of the
ignition lock. Refer to
18 and To stop the engine on page 21 .
•
Make sure that the engine starts when you turn the
ignition key to the start position.
•
Make sure that the engine stops immediately when
you turn the ignition key to the stop position (O).
To do a check of the reverse operation system (ROS)
If the reverse operation system (ROS) does not operate
correctly, speak to an approved service agent.
1. Start the product. Refer to
page 18 .
2. Engage the cutting deck. Refer to
disengage the cutting deck (TC 112) on page 19 or
To engage and disengage the cutting deck (TC 112)
on page 19 .
Read the warning
To start the engine on page
To start the engine on
To engage and
9
Publicidad
