MPM MBL-35 Manual De Instrucciones página 17

- The equipment is not designed to operate using external timers
or a separate remote control.
- Do not connect the plug to the power socket with wet hands.
- For the safety of children, please do not leave freely accessible parts
of the packaging (plastic bags, cardboard boxes, polystyrene, etc.).
- WARNING! Do not allow children to play with the film. Danger
of suffocation!
- Check that the power parameters on the device's rating plate
correspond to the parameters of your power supply network.
- CAUTION! Before starting cleaning and maintenance works,
disconnect the device from the power supply network and wait
until it cools down completely after work. Do not submerge the
device into water!
- CAUTION! Do not use sharp objects, abrasive polishes, solvents
or other strong chemicals for cleaning since their use may cause
damages to the device.
- Before the first use, remove all bags, stickers, tapes and transport
locks from the device and its accessories.
- Disconnect the device from the power supply each time when the
device is left unattended and before any assembling, disassembling,
or cleaning works.
- Wait until the motor stops completely before disassembling the
device.
- Pay special attention when handling the blades, especially when
removing and washing them.
- Do not exceed the maximum capacity indicated on the container.
- Allow hot ingredients to cool down before processing them.
- Clean the device, in particular parts being in direct contact with food,
before first use, immediately after finishing work and if the device
has not been used for a long time. The procedure is described in
details in the "CLEANING AND MAINTENANCE" section.
- Keep your hands away from moving parts when the device is in
operation!
- CAUTION! Avoid physical contact with the cutting blades while
emptying and cleaning the device as they are very sharp and
might cause serious injures.
EN
17