MPM MBL-35 Manual De Instrucciones página 19

3. To start blender:
• Set the speed using the control knob (C) (speed range: 1-12), then press and hold the ON/OFF
button (A).
• Press and hold the Turbo button (B) for short-term operation of the device at maximum speed.
4. After the work is finished, turn the control knob to the lowest speed and disconnect the device
from the power source.
5. Do not exceed the maximum duration of continuous operation of the appliance (information given
in the table below).
Type of attachment
Mixing attachment (5)
Attachment for whipping egg whites, light creams and sauces
(7)
Shredding kit (8)
CLEANING AND MAINTENANCE
1. Before cleaning/maintenance disconnect the device from the power supply.
2. Clean the blender housing (1) with a damp cloth. Avoid direct contact of the blender housing with
liquids; neither submerge nor wash under running water, etc.
3. Wash the other accessories in warm water with detergent, rinse and dry or put in the dishwasher.
4. Periodically check parts before reassembling. Do not use the blender if the knives are jammed or
rotate with difficulty.
CAUTION! Do not use sharp objects, abrasive polishes, solvents or other strong chemicals for
cleaning since their use may cause damages to the device.
TECHNICAL DATA
Technical specifications are given on the product nameplate.
Length of mains cable: 1.04 m
CAUTION! MPM agd S.A. reserves the right to technical changes.
Proper disposal of the product (waste electrical and electronic equipment)
Marking on the product indicates that after the service-life of the product expires, it should not be dis-
posed with other type of municipal waste. Used equipment may have a negative impact on the environ-
ment and health of people due to potentially containing hazardous substances, mixtures and components.
Mixing electric waste with other types of waste or disassembling those in an unprofessional manner may
cause a release of substances that are hazardous to the environment and health. Used equipment should
be handed-over to a point for collection of electric waste. In order to obtain detailed information regarding the
electric waste collection points, the user should contact the municipal point of electric waste collection or used
equipment processing department.
Maximum duration of
continuous operation
60 sec.
3 min.
30 sec.
EN
19