HALE 60DWC Guía De Uso página 16

5.2 OPERATION
WARNING!
6
Make sure the area around the Humidifier does not become damp or wet. If dampness
occurs, turn the output of the Humidifier down.
Switching on the humidifier
To switch on the humidifier, do the following:
1 Press the power button to switch on the humidifier.
Operating the Direct Water Connection (DWC) function
To operate the DWC function, do the following:
1 Press and hold the Direct Water Connection (DWC) button for 3 seconds to
activate the Direct Water Connection function.
The DWC LED indicator lights up when the DWC function is activated.
If the water level is below the MIN water level, the water reservoir is filled until the
high water level sensor measures a full water reservoir, or after 9 minutes.
2 When operating the DWC function for the first time, wait next to the Humidifier
until you hear the water stops flowing.
The DWC starts again when the water level in the water reservoir is below the MIN
water level again.
3 Press and hold the temperature and Direct Water Connection (DWC) button for 3
seconds to switch off the DWC function.
The DWC LED indicator switches off.
NOTICE!
6
When the Humidifier is switched off in any way, the DWC function also switches off.
When the Humidifier is switched on, press and hold the temperature and Direct Water
Connection (DWC) button for 3 seconds again to switch the DWC function back on.
16