HALE 60DWC Guía De Uso página 20

3 Create an account or log in with you rexisting account created at the hale-
cloud.com platform.
4 Select Add device.
5 Select the Building, Level, and Room where the device will be placed. You can
create the set up with the + in the down-right corner.
6 Turn on the WIFI pairing modus by pushing the WIFI button for 10 seconds
untill you hear a beep and see a blinking light.
7 Select Pairing.
8 Select Device.
9 Scan the QR code or fill in the serial number which you can find on the
backside of the Humidifier.
10 Set up the 2.4 GHz network. Fill in your network name and your password.
11 Once connected, the WIFI LED turns solid.
The Humidifier is now connected to the network. Repeat steps 4 through 11 in this
chapter for each Hale device you want to connect.
To change the WIFI settings, press and hold the WIFI pairing button untill it starts
blinking again. Now you follow the connecting procedure again.
6.3 AUTOMATING SETTINGS IN THE HALE CLOUD
The automation function of the HALE cloud can be used when there is an
additional Hale Air Sense located in the same room or on the data of the
Humidifier it self. With the Hale Air Sense you can control the climate in a room
more acurately and more data is available.
To setup up the automation in the cloud, do the following:
1 In the HALE cloud, navigate to the room where the devices are located.
2 At the right top of the Humidity graph, click Automation.
3 Switch the top button to enable the Automation setting.
20