HALE 60DWC Guía De Uso página 17

Setting the fan speed
To set the fan speed, do the following:
1 Press the fan speed button to switch on the fan.
2 Press the fan speed button again to go through the different fan speeds.
The selected fan speed lights up.
3 To vary the fan speed based on the detected humidity, press the AUTO button.
4 Use the humidity level adjustment buttons to select the desired humidity. The
default humidity setting is 45%.
See the table below for the specifications of different fan speeds. The automatic
detection is based on the default 45% humidity setting.
Automatic detection
humidity
> 70%
60 - 70%
50 - 59%
40 - 49%
< 40%
Press the clean air button to run the fan without humidifying.
Setting the timer
To set the timer, do the following:
1 Press the timer button to activate the timer function. The display shows the set
time.
2 Use the humidity level adjustment buttons to increase or decrease the timer.
Fan speed
Off
1
2
3
4
Air volume
300 m /h
3
450 m /h
3
600 m /h
3
800 m /h
3
17