Happy Garden OSLO PC510 Manual Del Usuario página 37

OSLO
PC510-PC510H-PC511H-
PC512H-PC513H-PC514H
EN
5
Place 3 x 90 mm screws (M) (to support the reflector) on the flame
guard cap.
Screw the gas connection tube (not supplied) to the connection
piece on the burner (B). Tighten the connection properly with a
spanner.
Pass the pipe through the pole (D).
Connect the other end of the gas connection pipe to the gas
pressure regulator (not supplied), which in turn must be connected
to the gas cylinder.
Fix the burner unit to the post with 4 M6x10mm screws (K).
Check that the pole and burner unit are fitted in accordance
with the instructions provided and that all screws and nuts are
tightened correctly.
6
Assemble 2 reflector panels (A) together. Insert 1 M6x10 screw (K).
Caution: do not overtighten.
Repeat the operation to finish assembling the 4 panels.
Tighten all screws.
37
happy-garden.fr