Publicidad
Idiomas disponibles
Idiomas disponibles
• These SOFA-configuration specific flow ratings NOT be exceeded at any time the pool
is open to bathers.
• Cover/grates, when installed, shall not protrude more than 5.1 cm (2 in) from the
finished surface of the pool in which the SOFA is installed.
8.
Installation Information label (Copy)
Manufacturers name: Bestway (Nantong) Recreation Corp.
Cover part number: S01
Life expectancy: 3 Years
Cover flow rating: 20 GPM
Configuration and installed orientation: Wall
Location: Spa Pool liner
Date of installation:_______________
Installer needs to fill in the balance of the information and permanently post it as
near as feasible to the pump control. Keep a copy of this information with the other
important pool related documents.
Please research and download General Certificate of Conformity through
www.bestwaycorp.com
IMPORTANT:
WARNING:
The GFCI plug must be tested before each use to avoid risk of electric shock.
WARNING:
Before inserting plug into a power outlet, make sure the current rate of
the power outlet is suitable for the pump.
WARNING:
Do not use the pump if this test fails. For assistance, please visit the
support section on our website, www.bestwaycorp.com.
WARNING:
The spa is a class I electrical appliance and must be connected directly to
a grounded socket. It is recommended to only use a socket which is
resistant to humidity
socket for signs of damage before using the spa – do not use the spa if the plug or socket
is damaged. If you are unsure about the quality of the electrical supply, please consult a
qualified electrician before use.
SAVE THESE INSTRUCTIONS
GFCI WARNING
RISK OF ELECTRIC SHOCK. THE GFCI MUST BE TESTED BEFORE
TURNING ON THE PUMP EACH TIME.
and capable of high power loading. Regularly check the plug and
9
Publicidad
