Publicidad
Idiomas disponibles
Idiomas disponibles
WRENCH SPECIFICATIONS
Battery type
Power output
Drive size
Torque range
Torque Accuracy*
Units
Gear Teeth
Operating temperature range
Storage temperature range
Weight
*The accuracy of the readout is guaranteed from 20% to 100% of maximum range +/- 1 increment. Calibration point is at the middle line of the five grip lines on the rubber handle. For maintaining
accuracy, calibrate the wrench at regular intervals (1 year recommended).
Remove batteries if the device will not be used for
‑
several months.
‑
Transporting batteries can possibly cause fires if the
battery terminals inadvertently come in contact
with conductive materials such as keys, coins, hand
tools and the like. So when transporting individual
batteries, make sure that the battery terminals are
protected and well insulated from materials that
could contact them and cause a short circuit.
Low Voltage Indicator
If the battery strength is low, the LCD
symbol and power down.
1. Replace batteries.
OPERATION
WARNING: To reduce the risk of serious
personal injury, turn unit off before making any
adjustments or removing/installing attachments
or accessories. An accidental start‑up can cause injury.
Power On (Fig. C)
1. To turn the wrench on, press set button
2. The LCD
6
will display the current value.
Auto Power Off
1. The wrench will power off automatically after
thirty seconds of not being used.
Manual Power Off
1. Turn the wrench on if it is not powered on.
2. Press and hold the button
Battery Level Gauge
Battery gauge indicates four levels of remaining charge.
1.
indicates ~ 75% to 100% remaining
2.
indicates ~ 50% to 75% remaining
3.
indicates ~ 25% to 50% remaining
4.
indicates 25% or less remaining
TWX40D
(x2) AAA
3.0V
3/8''
11‑54 Nm
8‑40 ft‑lb
CW ±2%
Ft‑lb, in‑lb, N‑m
72
‑20 °C / +50 °C
‑4 °F / +122 °F
‑20 °C / +70 °C
‑4 °F / +158 °F
2.4 lbs. (1.08 kg)
6
will display a battery
.
7
until the LCD
displays "OFF".
7
6
TWX75D
(x2) AAA
3.0V
3/8''
20‑102 Nm
15‑75 ft‑lb
CW ±2%
Ft‑lb, in‑lb, N‑m
72
‑20 °C / +50 °C
‑4 °F / +122 °F
‑20 °C / +70 °C
‑4 °F / +158 °F
2.6 lbs. (1.175 kg)
5. When there is not enough energy remaining in the
battery to operate reliably, the battery frame will blink
and the wrench will turn off.
Unit Selection
1. Turn the wrench off.
2. To cycle through the available units, press and hold the
set button
7
until the torque value starts blinking.
3. Once the screen displays a blinking torque value you may
press the set button
4. Choose from N‑m, in‑lb and ft‑lb.
5. To choose the selected unit, press and hold the set button
for three seconds. The torque value will stop blinking.
Setting Required Torque (Fig. C, D)
This wrench has multi unit capability: N‑m, in‑lb, and
ft‑lb. Identify the unit scale displayed on the LCD
setting the torque.
1. Pull and hold down on the torque adjustment collar
2. Twist the anti‑slip handle
value is displayed on the LCD
nOTE: If you see a LO or HI instead of a value, you have
reached the minimum or maximum torque setting.
3. Release the torque adjustment collar
desired torque value.
4. Use the LCD
6
Blinking Torque Value
The torque value will blink if the current torque value is off
by at least two percent of the set torque value.
Selecting Direction of Ratchet Rotation (Fig. A)
1. To select clockwise rotation, rotate the for ward/re verse
dial
2
to the left side.
2. To select counterclockwise rotation, rotate the for ward/
re verse dial
2
TWV150D
(x2) AAA
3.0V
1/2''
40‑203 Nm
30‑150 ft‑lb
CW ±2%
Ft‑lb, in‑lb, N‑m
Ft‑lb, in‑lb, N‑m
72
‑20 °C / +50 °C
‑4 °F / +122 °F
‑20 °C / +70 °C
‑4 °F / +158 °F
3.4 lbs. (1.53 kg)
until the desired unit it selected.
7
4
until the desired torque
6
.
5
to confirm the torque value is set correctly.
to the right side.
English
TWV250D
(x2) AAA
3.0V
1/2''
68‑339 Nm
50‑250 ft‑lb
CW ±2%
72
‑20 °C / +50 °C
‑4 °F / +122 °F
‑20 °C / +70 °C
‑4 °F / +158 °F
4 lbs. (1.78 kg)
7
6
when
.
5
to lock in the
5
Publicidad
